Creality Comgrow Ender 3 3D Printer

Customer Reviews

Based on 2 reviews Write a review

Ender-3 V2 in stock in the USA right now! If you have any problem please contact service@comgrow.com
Ender 3 Review | About Ender 3 | FAQ | Ender 3 Firmware 

Creality Ender 3 advantages

  • Resume Print Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
  • Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-Shape with POM wheels make it move noiseless, smoothly and durable.
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available.

Creality Ender 3 parameter

Modeling Technology FDM(Fused Deposition Modeling)
Printing Size 220*220*250mm
Machine Size 440*410*465mm
Package weight 8kg
Max Traveling Speed 180mm/s
Filament 1.75mm PLA,TPU,ABS
Input AC 100-265V 50-60Hz
Output DC 24V 15A 360W
Layer Thickness 0.1-0.4mm
Nozzle diameter 0.4mm eom
Precision ±0.1mm
File Format STL,OBJ,G-Code
Working Mode Online or SD ofline
Max Nozzle Temperature 255℃
Max Hot bed Temperature 110℃

About Creality Ender 3 

Ender-3


ender-3ender-3

ender-3ender-3ender-3ender-3ender-3ender-3ender-3ender-3ender-3ender-3ender-3

 


FAQ

Filament not stick on hot bed ?

For newcomers,this is the most common problem.Do not worry,you can solve it easily.Generally,the distance between nozzle and platform is too far or near.So rotary the knob under platform to adjust the distance between the nozzle and platform again,at a piece of A4 paper distance or less) .

The display shows "Min temp"?

This happens for the following reasons: 1. Thermistor port of nozzle is not plugged into the motherboard above, or poor contact; 2. Thermistor port of nozzle is broken, you need to replace the spare thermistor.

The display shows "MAX temp"?

This happens for the following reasons:

1.Thermistor port of nozzle screw is locked tightly, cause the temperature can not be sensing;

2.Thermistor port of nozzle is broken, you need to replace the spare thermistor.

Axis movement is not normal ?

Please check axis lines and limit lines whether the one-to-one correspondence,whether loose.When you check the extruder motor,you must preheat nozzle over 185℃.

Circles not round,Lines not touching?

If X/Y belt is loose,you can find circles are not round,Lines not touching when printing.Tighten all belts as far as possible.

How to level Creality Ender 3 ?

  1. Move the nozzle so that it’s positioned over the left corner of the bed. A half-inch or so from both sides is a good location.
  2. Slide the paper between the nozzle and the bed. If it doesn’t fit, drop the corner until it does.
  3. Once the paper is able to slide under the nozzle, very slowly raise the corner with the adjuster. Remember: Clockwise moves the bed up. As you do this, gently slide the paperback and forth. The moment you feel even the slightest resistance to your moving the paper, stop turning the knob. That corner is (almost) ready to go.
  4. Do the same for the other three corners of the build plate. Always advance the hot end to a new corner slowly. This will prevent damage to the build plate in case the nozzle starts to drag. If this occurs, simply lower the next corner (before starting the leveling process) to make some room.
  5. After you’ve adjusted each corner once, go back and check the four corners again. You may have to do further adjustments to get all four correct.

Does Creality Ender 3 need to be assembled all by itself ?

No, Ender 3 is a semi-assembly machine. You can refer to our packing instructions for assembly. Its installation is quite simple.

 

How long will it take to install Creality Ender 3 ?

The specific installation time depends on the user's familiarity with the product.If you are familiar with the product and can fully understand the installation instructions, it will take about 30 minutes. If you don't know much about a 3D printer, it takes about two or three hours.

 

What filament does Creality Ender 3 use for printing ?

PLA,PETG,ABS

Does Creality Ender 3 support automatic leveling?

No,Ender 3 does not support automatic leveling.

 

Creality ender 3 how to change filament ?

Step 1:Adjust the nozzle temperature to the consumable melting temperature and remove the consumables to be replaced.

Step 2:Push the new filament along until you feel firm resistance. This means it has reached the nozzle.

Step 1:Set the heating temperature, eliminate old consumables, and make new prints.

 


Ender 3 Firmware Download

Ender-3 Firmware Download

Ender 3 SD Card File  Download

Ender 3 BL touch   Download

Ender 3 Source Code 1.1.61 version Download

 

Subscribe