Easy and Quick Assembly: It comes with several assembled parts, you only need about 15 minutes to assemble 20 nuts well.
Patent Technology: MK-8 Extruder greatly reduces plugging risk and bad extrusion; V-Slot with POM wheel make it move noiseless, smoothly and durable
Safety protected Power supply, Only need 5 minutes for hotbed to reach 110℃
Strict Test: Strict testing for key components before delivery and life-time technical support
Modeling Technology：FDM (Fused Deposition Modeling）
Max Traveling Speed：180mm/s
Input：AC 100-265V 50-60Hz
Output：DC 24V 15A 360W
File Format：STL,OBJ, G-Code
Working Mode：Online or SD offline
Max Nozzle Temperature：255℃
Max Hot bed Temperature：110℃
Filament does not stick on hotbed?
For newcomers, this is the most common problem. Do not worry, you can solve it easily. Generally, the distance between nozzle and platform is too far or near. So rotary the knob under the platform to adjust the distance between the nozzle and platform again, at a piece of A4 paper distance or less).
The display shows "Min temp"?
This happens for the following reasons: 1. The Thermistor port of nozzle is not plugged into the motherboard above or poor contact; 2. The Thermistor port of nozzle is broken, you need to replace the spare thermistor.
The display shows "MAX temp"?
This happens for the following reasons: 1. Thermistor port of nozzle screw is locked tightly, cause the temperature can not be sensing; 2.Thermistor port of nozzle is broken, you need to replace the spare thermistor.
Axis movement is not normal?
Please check axis lines and limit lines whether the one-to-one correspondence, whether loose. When you check the extruder motor, you must preheat nozzle over 185℃.
Circles not round, Lines not touching?
If X/Y belt is loose, you can find circles are not round, Lines not touching when printing. Tighten all belts as far as possible.
What are the main differences between the Creality Ender 3 Pro and Creality Ender 3?
- Improving mechanical properties. Reduce friction and provide better dimensional stability.
- Improved extruder, reduce the risk of clogging and uneven extrusion.
- New magnetic printing surface, removable and flexible, which allows you to pluck prints off the build plate easily.
Does Creality Ender 3 Pro support breakpoint interruption?
What filament does Creality Ender 3 Pro use for printing?