【More Stable】 Redesigned with a much more sturdy, 40x40 aluminum extrusion for the Y-axis base. This provides stability for the printing process, leading to better print quality.
【 EASY TO ASSEMBLE】This almost seems semi-assembled. You just put together a bunch of pre-assembled units. All loose parts have labels on the bags. All tools are included, nothing extra needed.
【BRAND POWER SUPPLY】 Ender 3 Pro comes with a UL Certified MeanWell power supply, protecting your printer from unexpected power surges, that can heat the hotbed to 110℃ in just 5 minutes.
【RESUME PRINT FUNCTION】The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
【REMOVABLE BUILD SURFACE PLATE】 A new state of the art “C-MAG” magnetic sticker is designed for Ender 3 Pro, it is entirely removable, flexible, and can better adhere to the platform. Once the model is finished printing, remove the magnetic upper from the lower and bend or flex the print surface to watch the model effortlessly pop off the printing surface.
Modeling Technology：FDM (Fused Deposition Modeling）
Max Traveling Speed：180mm/s
Input：AC 100-265V 50-60Hz
Output：DC 24V 15A 360W
File Format：STL, OBJ, G-Code
Working Mode：Online or SD offline
Max Nozzle Temperature：255℃
Max Hot bed Temperature：110℃
Filament does not stick on hotbed?
For newcomers, this is the most common problem. Do not worry, you can solve it easily. Generally, the distance between nozzle and platform is too far or near. So rotary the knob under the platform to adjust the distance between the nozzle and platform again, at a piece of A4 paper distance or less).
The display shows "Min temp"?
This happens for the following reasons: 1. The Thermistor port of nozzle is not plugged into the motherboard above or poor contact; 2. The Thermistor port of nozzle is broken, you need to replace the spare thermistor.
The display shows "MAX temp"?
This happens for the following reasons: 1. Thermistor port of nozzle screw is locked tightly, cause the temperature can not be sensing; 2.Thermistor port of nozzle is broken, you need to replace the spare thermistor.
Axis movement is not normal?
Please check axis lines and limit lines whether the one-to-one correspondence, whether loose. When you check the extruder motor, you must preheat nozzle over 185℃.
Circles not round, Lines not touching?
If X/Y belt is loose, you can find circles are not round, Lines not touching when printing. Tighten all belts as far as possible.
What are the main differences between the Creality Ender 3 Pro and Creality Ender 3?
- Improving mechanical properties. Reduce friction and provide better dimensional stability.
- Improved extruder, reduce the risk of clogging and uneven extrusion.
- New magnetic printing surface, removable and flexible, which allows you to pluck prints off the build plate easily.
Does Creality Ender 3 Pro support breakpoint interruption?
What filament does Creality Ender 3 Pro use for printing?